As someone who works at a computer more or less all day every day and has chronic back problems, a standing desk is an important part of my office setup. I’ve been using one for over ten years and back then it was something of a luxury. But lately I’ve been seeing motorized standing desks, not dissimilar in design to the one I bought all those years ago, popping up for shockingly low prices. Are these super-cheap desks worth your money?
I’ve used three different desks in the last decade of working from home and writing about technology — maybe four, depending on how you count all the various parts and components. And I reviewed another model for one of my previous employers, all from different suppliers, so I feel like I know what I’m talking about here. My latest one is something of a behemoth, to deal with my huge desktop and triple-monitor display. (Hey, I write for PCWorld, I come by it honestly.)
Between the heavy-duty, four-legged, quadruple-motor Uplift frame and the custom-made six-foot desktop I ordered from a Dallas carpenter, the whole package cost me over $1,500. And I’m sorry if that sounds like flexing, but I literally spend more time at this desk than in my bed some weeks. It’s worth making it a good one. For the sake of comparison, the previous desks I’ve used and then passed on to friends or family members when I upgraded were all $600 or more.
Looking to pick up a new monitor for your home office? Check out PCWorld’s roundup of the best monitors available today.
Where are all these cheap standing desks coming from?
But you don’t have to spend four figures on a standing desk, even a “fancy” one with a motorized raising and lowering action. In fact, I bought (or rather expensed for this very article) a motorized standing desk off Amazon for precisely $100. (The same model is $200 at the time of writing, but it’s easy to find alternatives.) Shipping was free, tax an additional $6. It was only the latest entry I’d seen on SlickDeals for super-low-priced standing desks, which got me wondering if they were actually worth the price, or in any way comparable to the more premium desks to which I’m accustomed.
A hundred bucks is a pretty good price for a 55-inch bamboo desk all on its own. You might be able to find a particle board version of one at Walmart or Target, for example, to say nothing of a standing version. Or at least that’s what I assumed — in fact I found a nearly identical desk, only slightly smaller and lacking the keyboard tray, for precisely $100. Even less expensive ones are available if you look around.
Walmart
So, clearly there’s been something of a race to the bottom in this market, with a hoard of overseas suppliers making desks as cheaply and quickly as possible. I suspect a spike in demand during the pandemic has created a huge surplus of these desks. But “cheap” doesn’t automatically mean “bad,” as my hard-working Kia Soul can testify.
The question I aim to answer is whether or not you should save some money on your setup by going with one of these ultra-cheap motorized standing desks or if you’re better off saving up for a more deluxe option from a reliable supplier.
Putting it together
The INNOVAR (ALL CAPS) desk arrived from Amazon in a shocking one day, and as it happened to be Saturday, I set to assembling it immediately. I’m no stranger to flat-pack furniture in the Scandinavian style, and I’ve assembled and taken apart similar desks about a dozen times, so it only took me about 45 minutes to put everything together. While there are commonalities in all of these desk designs, I spotted a few important differences.
Michael Crider/Foundry
The first thing I noticed was that it was shockingly light. At 46.2 pounds (just under 21 kilograms) in the box, I was able to move it into my office in one trip, even with my back problems. Frankly this didn’t bode well: If there’s one thing I like in a desk, it’s some heft, especially when the important bits are steel. Upon opening the box, my suspicions were confirmed.
While the bamboo top is pretty typical and appears to be fine, all of the steel parts are made from ⅛” or 2mm panels. They’re all light enough to toss around…not that you should try it. For the sake of comparison, the frame of my old Fully Jarvis desk with a similar size weighed at least twice as much.
Michael Crider/IDG
Speaking of steel, I immediately noticed that there’s no top frame to the Innovar. All three of the previous desks I’ve used, plus one review unit, had steel crossbars that are affixed to the bottom of the desktop. The top is laid upside down on the floor, then the legs are bolted in place. Not so here: the instructions had me assemble the legs first, complete with the motor and the T-bars, then screw the entire assembly onto the bottom of the desktop, along with the included keyboard tray and plastic accessory hooks.
Michael Crider/IDG
Exposed innards
Being familiar with these desk designs, I did a double-take looking at the actual motor mechanism. It’s housed in a semi-exposed barrel on one side of the frame, whereas the other standing desks I’ve used had motors hidden inside the leg pillars. Note the plural there: this desk has just one rather weak motor driving both legs at once. It does this by means of a long hexagonal steel bolt, essentially a giant Allen wrench spanning between the two legs.
Michael Crider/Foundry
The fact that this driver bolt was exposed to the bottom of the desk threw me for a loop. Not only is it exposed, just begging to get caught on cables or wires, it’s positioned on the front side of its crossbeam, facing the user. The odds of actually rubbing against your knees are pretty low unless you moonlight as an NBA player, but as someone who often runs wires all across the underside of a desk to keep the top nice and clean, it makes me nervous to see moving parts anywhere in there.
Michael Crider/Foundry
Also, having an exposed mechanism like this means that the legs aren’t automatically level out of the box. I had to manually adjust the initial height of one side of the frame to match the other. And to get them matched on a separate hexagonal bar that I had to install myself, I had a limited choice of approximately six positions to place the “master” leg at to match it to the other side. I think I was able to eyeball it reasonably well, but this is a problem I haven’t encountered on desks with mechanisms that are less threadbare.
Michael Crider/Foundry
There are a couple of extra points in this specific desk package worth highlighting. First, it comes with a slide-out keyboard tray, something you don’t often see at any price. I prefer to raise my monitors up with VESA arms rather than lower the keyboard and mouse area, but it all achieves the same effect, so having the option without spending any extra money is a point in its favor. The cheap plastic hooks, presumably for hanging bags or headsets, I could do without entirely. I wouldn’t trust any kind of heavy bag to it (certainly nothing with textbooks inside), and second I’d rather see some more useful cable routing, like a tray for a power strip at the rear of the desk.
Highs and lows
There’s one point in this desk’s favor: it comes with a four-setting, programmable height controller, complete with an LED readout. That surprised me — it was a pricey little upgrade when I bought a Fully desk. I imagine that these desks have become so ubiquitous that like Bluetooth in the head unit of a budget car, it’s just standard now. It’s a nice little controller with the LED readout smartly hidden within the white plastic. It’s just a shame that the power connector pins were so bent when I assembled it that I had to manually straighten them out with a flathead screwdriver. Some more stringent QA would have caught that.
Michael Crider/Foundry
Bent pins were far from the only issue I found with the desk. While I was finishing the setup, I noticed that the front was seriously dipping down. This isn’t completely the fault of the desk, as there’s a bit of a bunched carpet pad near the wall in my office. But I never noticed it before because no other piece of furniture in my office was so light that it couldn’t press down level on this pad with its own weight. Thankfully there are plastic adjustment feet underneath the white steel legs, and I was able to juuuuuust about level the surface of the desk by putting the front ones at their maximum height.
Michael Crider/Foundry
Finally, with everything set up to my satisfaction, I tested the raising and lowering action. It works. It’s slow, especially at the start, but it works. You can program up to four positions simply by pressing and holding the corresponding buttons on the controller, and it measures height in increments of a tenth of an inch. In fact you can set the surface even more precisely, because the action of the motor is analog, even though it’s measured digitally.
Not quite a battlestation
I proceeded to set up a pretty basic workstation: small laptop, monitor, keyboard, mouse, and mousepad. A lightweight lamp, heavy coffee mug, and a little LEGO set for flavor rounded it out, plus the various cables needed for everything with admittedly sloppy management. I’ve used it for a few weeks, but right away I could tell that this desk would be lacking in sturdiness.
Login to add comment
Other posts in this group
If you’re looking for a powerful laptop with an absolutely stun
Last week, the publisher and developer of co-op Helldivers 2
Microsoft has made it much, much easier to upgrade from Windows 10 to
If you plan on creating an atmosphere around you when you work, play
There are thousands of characters in the Star Wars universe, but Admi
If you’re looking for a huge amount of portable storage, which
“Logging in without any passwords, how’s that supposed to