Apart from a few exceptions, the last terminal in a terminal strip must be closed off with an AP end plate. End plates must also be used within a terminal strip when it makes use of terminals of diffe
Weidmüller
|
2
Obchody
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-q
Weidmüller
|
2
Obchody
Female plugs with crimp wire connection system.The female plugs provide space for labelling and can be coded. 0.25 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)400 V (IEC) / 300 V (UL)21 A (IEC) / 10 A (UL) Obs
Female plugs with crimp wire connection system.The female plugs provide space for labelling and can be coded. 0.25 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)400 V (IEC) / 300 V (UL)21 A (IEC) / 10 A (UL) Obs
Zásuvný svodič pro přepěťovou ochranu Weidmüller VPU PV II 3 1000 2530550000, 20 kA, černá, oranžová
Zkoušeno podle EN 50539-11 Vhodné pro použití podle IEC60364-7-710 -712 / EN 50539-12 Kódováno úroveň napětí Montáž do rozvodné skříně Tepelná ochrana
Weidmüller
|
2
Obchody
Male connectors with 90° outlet direction. The solder pin length is optimised for wave flow soldering. The pin headers provide space for labelling and can be coded. 400 V (IEC) / 300 V (UL)18 A (IEC)
Konektor do DPS Weidmüller SL 5.00/04/180 3.2SN OR BX 1581340000, 20 mm, pólů 4, rozteč 5 mm, 100 ks
Male connectors with straight outlet direction. The solder pin length is optimised for wave flow soldering. The pin headers provide space for labelling and can be coded. 400 V (IEC) / 300 V (UL)18 A (
Konektor do DPS Weidmüller SL 5.08HC/04/180 3.2SN OR BX 1146380000, 20.3 mm, pólů 4, rozteč 5.08 mm,
Male headers made from glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. The
Male headers made from glass fibre-reinforced plastic with 90° wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. There is
Konektor do DPS Weidmüller SL 5.08HC/04/180 3.2SN BK BX 1148140000, 20.3 mm, pólů 4, rozteč 5.08 mm,
Male headers made from glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. The
Male plugs with clamping-yoke screw wire-connect system. With clip-on feet for attaching the male plugs on rail. The male plugs provide space for labelling and can be coded. 0.2 - 2.5 mm² (IEC) / 26 -
Male headers made from glass fibre-reinforced plastic with 90° wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. There is
