SCULPFUN S30 Pro Max 20W Laser Engraver Cutter
Product Description
Sculpfun S30 Pro Max Main FeaturesSculpfun S30 Pro Max equips a 20W quad-diode laser module with a replaceable protective lens underneath that will make it possible to keep your engraver in top condition for many years!Sculpfun S30 Pro Max uses the same focusing method as the brand`s models including the Sculpfun S10 and Sculpfun S9. The laser module is held on a sliding rail with thumbscrews on the back. The focusing is done by setting the correct distance between the laser module and the work material with an aluminum focusing block which sets the distance to 40mm.The air assist pump of the Sculpfun S30 Pro Max outputs 30 l/min and can be enabled via control software (Lightburn) for only the specified engraving layers. This is great because you can engrave one project that has multiple operations and for example you can select to turn off the air assist for engraving and turn it on for laser cutting only. The air assist pump already comes with the machine.Automatic Air-assist0.080.1mm Laser Focus32-bit MotherboardReplaceable LensEngraving Size 410400mmExpandable to 935905mmAutomatically Controlled Air Assist SystemSculpfun S30 series is equipped with an air-assist 32-bit motherboard and a control-type air pump which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button this makes the engraving and cutting very clean and is very suitable for the manufacture of exquisite gifts.Built-in High-Pressure Air Assist NozzleS30 series is equipped with an advanced high-pressure air-assisted metal nozzle which can generate 30L/min high-pressure airflow under the air pump greatly improving the cutting efficiency and the cutting speed is more than 5 times faster than that without air assist.Ultra-thin 20W LaserAdopting ultra-thin laser shaping technology the laser focus of the S30 series is as thin as hair and very powerful for engraving or cutting. The S30 Pro Max 20W pursues the ultimate cutting speed suitable for professionals shops or factories.Replaceable Protective LensS30 series laser adopts an innovative replaceable lens which greatly improves the service life of the laser which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use the lens can be replaced to restore the cutting power.Expandable Engraving AreaThe original engraving area is about 410x400mm while it features XY-axis expandable design so you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade up to 935x905mm engraving area which can help you better handle large area engraving or cutting work.Upgraded 32-bit Air-assist MotherboardThe latest 32-bit motherboard supports automatic air-assist control and reserves Bluetooth and SD card offline printing function. (Upgrade Kit sold separately)Industrial-grade Cutting Accuracy Extremely solid and high-precision linear slide rail X-axis make it reach industrial-grade engraving accuracy. When comparing small engraving details the S30 series does not have the wavy pattern that appears in ordinary engraving machines.Sturdy and Durable Aluminum Alloy FrameMade of high-strength aluminum alloy its frame can bear up to 50 kg weight without damage and is very durable. The frame can be used for a long time and maintain high precision only need to upgrade the latest laser when the machine needs to be upgraded.Safety DesignThe presented A4 size steel pad can well protect the table from laser damage. There is an eye-catching power switch on the machine you can directly and quickly turn off the power in an emergency.Right-angle Measuring RulerThere are precise scale lines on the X-axis and Y-axis to form a right-angle measuring ruler which is convenient for you to quickly measure the size of the engraved object.Note1. Because of the powerful laser power it is forbidden to run the engraving machine without being supervised. Pause it if you're not around.2. For detailed machine instructions please refer to the manual for parameter settings.3. When operating the laser engraving machine please install the laser protective cover; if it is not installed you need to wear goggles.4. Do not touch the laser with your hands otherwise you may burn your hands.5. Please avoid a strong impact on the machine.6. It is forbidden for children under 14 years old to use this product and children over 14 years old need adult supervision.7. Do not apply the laser directly to any specular reflection object which may cause injury to the operator or burn the laser.SCULPFUN S30 SERIES32-Bit Air Assist MainboardS30 Series-Five Leading Innovative TechnologiesLimit SwitchS30 Pro 10W Dual-laserAir AssistIndustrial Grade Linear RailAutomatic Air Assist PumpX&Y Axis Expansion KitReplaceable Lens32-Bit Airassist MainboardHigh Density and Sharp Laser Beam20W Powerful Quad-laser TechnologyAUTOMATIC CONTROLLED AIR ASSISTS30 Pro Max is equipped with an air assist 32-bit motherboard and
Pros & Cons
Pros
- High Power (20W): Offers significant cutting power suitable for thicker materials and faster processing speeds compared to lower wattage lasers.
- Quad-Diode Laser Module: Provides stable and consistent laser output.
- Replaceable Lens: Extends the lifespan of the laser module and reduces long-term costs by allowing lens replacement instead of full module replacement.
- Automatic Air Assist: Improves cutting quality, reduces burning/charring, and increases efficiency. The ability to control it on a per-layer basis is a notable advantage.
- Expandable Engraving Area: Provides flexibility for handling larger projects or multiple smaller pieces in a single run.
- 32-bit Motherboard: Enables advanced features like automatic air assist control, Bluetooth connectivity (with upgrade), and offline printing capabilities.
- Industrial Grade Linear Rails: Contribute to high precision and accuracy, minimizing wavy patterns often seen with less expensive machines.
- Sturdy Aluminum Alloy Frame: Ensures stability and durability for long-term use.
- Built-in Safety Features: Includes a power switch, protective steel pad, and warnings emphasizing safe operation.
Cons
- High Price: As a 20W laser machine with advanced features, it is likely significantly more expensive than entry-level models.
- Learning Curve: The extensive feature set (air assist control via LightBurn, expandable axes) may require some learning and experimentation to fully utilize.
- Potential for Complexity: Advanced features can sometimes lead to increased maintenance or troubleshooting needs. While replaceable parts are a plus, repairs might be more involved.
- Safety Concerns: High power lasers inherently pose safety risks; the warnings highlight the need for constant supervision and proper protective gear (goggles).
- Expandability Costs: While expandable axes are a benefit, they require purchasing additional kits which adds to the overall investment.
- Software Dependency: Relies on LightBurn software for full functionality, potentially requiring users to learn its interface.
The Sculpfun S30 Pro Max 20W laser engraver/cutter appears to be a high-end machine targeting professionals or those seeking advanced features. Its strengths lie in its power, precision, expandable area, and thoughtful design elements like the air assist system and replaceable lens. However, it's important to consider the higher price point and potential learning curve associated with maximizing its capabilities.
AI-generated summary based on information from the internet.
Specifications
- Condition: new
- GTIN/EAN: 6910511283679
Price History
Available in other shops
Other Products
